[Communication Drivers] JTEKT Corporation TOYOPUC CMP-LINK SIO Driver

Details

Caution
Precautions for adding a new driver onto Windows Vista or later
Precautions for adding a new driver at Daylight Saving Time 
TitleJTEKT Corporation TOYOPUC CMP-LINK SIO Driver
VersionVer. 1.17.03
File NameTOY_LSIO.exe
Applicable SoftwareThe required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Related Devices
  • TOYOPUC-PC2
  • TOYOPUC-PC2J
  • TOYOPUC-PC3J
  • TOYOPUC-PC3JT
  • TOYOPUC-PC10
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below
ModelRequired driver verison
GP3000 SeriesVer.1.00.01 or later.
LT3000 SeriesVer.1.15.03 or later.
GP4100 Series (GP4106, 4107)Ver.1.13.02 or later.
GP4100 Series (GP4104:Ethernet Multilink only)Ver.1.13.02 or later.
GP4100 Series (GP4116, 4101)Ver.1.16.03 or later.
GP4100 Series (GP4114: Ethernet Multilink only)Ver.1.16.03 or later.
GP4000M SeriesVer.1.13.02 or later.
GP4000 SeriesVer.1.13.02 or later.
LT4000M SeriesVer.1.15.03 or later.
SP5000 SeriesVer.1.15.03 or later.
SP5000X SeriesVer.1.16.03 or late.
IPC Series for WinGPVer.1.10.02 or later.
General PCs for WinGPVer.1.11.02 or later.
Device/PLC Connection ManualFor details, please read the "Device/PLC Connection Manual" in the lower part of this page.
For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)".
Updated ContentsVer. 1.17.03 (Nov. 29, 2019)
The following setting was added:
The support device range of PC10G has been expanded.

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.

  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
  4. After installation, execute GP-Pro EX.
  5. Click on the Device/PLC area’s [JTEKT Corporation] selection and select [TOYOPUC CMP-LINK SIO].
     
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

updates
Driver
989.07 kB (1,012,808 Byte)
updates
Device/PLC Connection Manual
3.43 MB (3,601,401 Byte)

Update history

  • Ver. 1.17.03The following setting were added:
    • The support device range of PC10G has been expanded.
  • Ver. 1.16.03 The following setting were added:
    • PC10G-CPU was supported.
    • EB device was supported in PC3JG-CPU.
  • Ver. 1.15.03The following setting were added:
    • LT3000 Series is supported.
  • Ver. 1.14.03The following setting were added:
    • PC3JT CPU was supported.
  • Ver. 1.13.03 The following setting were corrected:
    • If "16ms" or more value is specified for Wait To Send, the communication error occurs.
  • Ver. 1.13.02The following setting were added:
    • GP4100 Series were supported.
    GP-Pro EX Ver. 2.60.000 or later is necessary to use a GP-4106 or GP-4107.
    GP-Pro EX Ver. 2.70.000 or later is necessary to use a GP-4104 (Ethernet Multilink).
  • Ver. 1.12.02The following setting were added:
    • Support Read/Write function of watch time.