[Communication Driver] GE Intelligent Platforms Series 90-30/70 SNP-X Driver

Summary

Last update: Jan. 30, 2026

Details

! Caution

Precautions for adding a new driver onto Windows Vista or later
Precautions for adding a new driver at Daylight Saving Time

TitleGE Intelligent Platforms Series 90-30/70 SNP-X Driver
VersionVer. 1.12.07
Supported Software

The required versions of software for this driver installer are as follows.

  • GP-Pro EX Ver. 5.00.000 or later and less than Ver. 5.02.000
  • Pro-Server EX Ver. 1.31.000 or later
You can check your version by "Help" function → "Version Info".
Supported Devices
  • Series 90-30
  • Series 90-70
Supported Units

Required versions depend on models.
Please check "Supported Models / Version" or the required versions of GP-Pro EX.

Required driver versions for different models are listed below

ModelRequired driver version
GP4100 SeriesGP4115Ver. 1.12.06 or later
GP4116
GP4000 SeriesVer. 1.11.05 or later
GP4000M SeriesVer. 1.11.05 or later
LT4000M SeriesVer. 1.12.05 or later
SP5000 SeriesVer. 1.12.05 or later
SP5000 X SeriesVer. 1.12.05 or later
ST6000 SeriesVer. 1.12.07 or later
STM6000 SeriesVer. 1.12.07 or later
STC6000 SeriesVer. 1.12.07 or later
ET6000 SeriesVer. 1.12.07 or later
GP6000 SeriesVer. 1.12.07 or later
IPC Series for WinGPVer. 1.11.05 or later
General PCs for WinGPVer. 1.11.05 or later

 

Device/PLC
Connection Manual		For details, please read the following PDF: gef_snpx.pdf
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents

[Ver. 1.12.07] （Jan. 30, 2026）

The following function is expanded:

  • Added support for the GP6000 Series. (The GPH6000 series is not supported.)

How to install (This is a self-extracting file.)

Prior to installation, be sure to close all software applications that are running.

  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
  4. After installation, execute GP-Pro EX.
  5. After installation, click on the Device/PLC area’s [GE Intelligent Platforms] selection and select [Series 90-30/70 SNP-X].

When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms and conditions

 

Download file

document
Installer 32bit
GEF_SNPX.exe
3.88 MB (4,072,784 Byte)
document
Installer 64bit
GEF_SNPX_x64.exe
3.00 MB (3,141,960 Byte)
document
Device/PLC Connection Manual
gef_snpx.pdf
1.55 MB (1,621,153 Byte)

 

Update History

[Ver. 1.12.07] (Jan.30, 2026)

The following function is expanded
  • Added support for the ST6000 Series.
  • Added support for the ET6000 Series.
  • Added support for the GP6000 Series.（The GPH6000 series is not supported.）
 

[Ver. 1.12.06] 

The following function is expanded
  • Support Alarm Summery Messag
  • Added support for the GP4110 Series
 

[Ver. 1.12.05] 

The following function is expanded
  • Added support for the LT3000 Series.
  • Added support for the LT4000 Series.
  • Added support for the GP4100 Series.
  • Added support for the SP5000 Series.
 

[Ver. 1.11.02] (Apr. 10, 2009)

The following issue was corrected
  • When writing specific data, an error of illegal communication response could be misdirected.