[Seiko Epson Corporation] Robot Controller Connection


You can connect GP4000 series to a robot controller “RC700/RC90” made by Seiko Epson Corporation to confirm a controller's status, and show JOB and alarm.



Supported Connection Devices

ManufacturerSupported Model
Seiko Epson CorporationRobot Controller "RC700/RC90"

Target HMI

Related UnitsGP4000 Series
ResolutionVGA (640 x 480 pixels)
Related ModelsGP-4501TW*1
  • GP-Pro EX Ver. 3.12.000 or higher is required.
  • GP-4501TW supports this functionality.
  • Please download the Seiko Epson Corporation Remote Ethernet driver(Ver.1.10.00 or later) from our website.
  • The PDF file of an explanatory material is also compressed into this file.

*1 If you use a model other than GP-4501TW, select the model in the Display Unit setting in the project file to activate the screen data.


  • Status Monitor of the Controller (Mode and operation status)
  • Any program can be started and stopped.
  • The status of the I/O controller can be monitored in real-time.
  • The JOB controller can be monitored.
  • Details of current alarm can be viewed on a GP unit. The alarm can also be reset.
  • The system history can be displayed at once, thus making monitoring easier.

How to Install

These download files are self-extracting files.
Double-click on the file to open a sample file and the PDF file of an explanatory material.

Download file

GP-4501TW VGA (640 x 480 pixels)
1.30 MB (1,358,445 Byte)

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Update history

[Rev. 00]  (2013/10/7)

  • New