GP-Pro EX Ver. 4.09.350 Limited Edition (Disc 1 / Disc 2)


Limited Edition is a trial version of GP-Pro EX. You can use the software without licenses (serial number and key code).
With Limited Edition, it is possible to transfer the screen data to ONLY GP4100 Series monochrome model.


  • ST6000 Series has some limitations. For details, please check "Readme".
  • Due to WinGP security enhancements, the key code is cleared when the system version is upgraded. Please set the key code again.
  • To update from the earlier versions (Ver. 4.00.000 to Ver. 4.09.120) to Ver. 4.09.200 or later, download Disc 1 in the bottom of this page, and install with a valid serial number and key code.
  • Be sure to download the installation file. After downloading, start installation using the drive on the computer to be installed. If a network drive is used, installation cannot be performed normally.
  • This file is very large. Downloading over a slow connection will require a long time.
  • This trial software does not allow transfer of the screen data which you have created to target machines (except GP4100 Series monochrome model).
  • For further information (Limitations or Cautions), please see Readme at the bottom of this page.


Prior to installation, be sure to close all software applications that are running.
  1. Create a DVD of the downloaded disk image (ISO).
  2. From the DVD you created, run ProEX_Setup.exe.
  3. The following screen will be displayed, click the checkbox of "Not Input Serial / Key Code (Limited Edition)", and then click "Next". (If you enter your serial / key code, the software will be fully functioned.)

    Please click here to upgrade GP-Pro EX Limited Edition to a functional version.
  4. Follow the instructions given.

File Description

[Disk1 Description]

  • GP-Pro EX Ver. 4.09.350
  • Transfer Tool / Version Reverter 

[Disk2 Description]

  • WinGP
  • GP-Viewer EX
  • Camera-Viewer EX
  • Data Copy Tool
  • GP Remote Printer Server 
  • EZ Fingerprint Recognition Setting Tool
  • EZ Fingerprint Recognition Unit Driver
  • Pass Through 
  • Pro-face Remote HMI Server
  • EZ Tower Light Driver

Operating Environment

Customers Using Windows XP, Windows Vista, or Windows 8
GP-Pro EX has ended support for Windows XP, Windows Vista, and Windows 8. To use any of these operating systems, use Ver.4.09.120.

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

Disc 1
967.50 MB (1,014,493,184 Byte)
Disc 2
1.47 GB (1,575,131,136 Byte)
  • Soft_GPPROEX409350D1.iso SHA256 : C2152B850FEBA9BCB37DB669E5AE5F31D833B8D3BDB6C5BEB5CF045BFC5E0481
  • Soft_GPPROEX409350D2.iso SHA256 : 774B71B9AC38C3A9EBF07FC063F579017616D1D0464D678CCC5C43CB4D479719

After downloading the disk image (ISO file), we recommend creating a DVD of the image before installing. Use the SHA values to check the downloaded data.


【When using sending E-mail feature】
It needs .Net Framework Ver. 4.5 or later to use this feature


Refer to the following Readme about the product's details.

Related Information

The new Architecture options include suggestions for building new equipment and facilities and suggestions for enhancing existing equipment and facilities to improve site operations. Let's get started with Industrial IoT easier.