[Communication Drivers] Pro-face by Schneider Electric DM Link Communication 1:1

Details

Caution
Precautions for adding a new driver onto Windows Vista or later
Precautions for adding a new driver at Daylight Saving Time

TitlePro-face by Schneider Electric DM Link Communication 1:1
VersionVer. 1.10.00
Applicable Software

GP-Pro EX Ver4.09.000 or later and less than V5.01.000
Pro-Server EX Ver.1.30.000 or later

You can check your version by”Help”function→”Version Info”.
Related Devices
  • Support device for DM Link Communication 1:1
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below
ModelRequired driver verison
GP4100 Series (GP4114)Ver. 1.10.00 or later
GP4000M SeriesVer. 1.10.00 or later
GP4000 SeriesVer. 1.10.00 or later
GP4000H SeriesVer. 1.10.00 or later
LT4000M SeriesVer. 1.10.00 or later
SP5000 SeriesVer. 1.10.00 or later
SP5000X SeriesVer. 1.10.00 or later
ST6000 SeriesVer. 1.10.00 or later
STM6000 SeriesVer. 1.10.00 or later
STC6000 SeriesVer. 1.10.00 or later
ET6000 SeriesVer. 1.10.00 or later
GP6000 SeriesVer. 1.10.00 or later
IPC Series for WinGPVer. 1.10.00 or later
General PCs for WinGPVer. 1.10.00 or later
Device/PLC Connection ManualFor details, please read the "Device/PLC Connection Manual" in the lower part of this page.
For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)".
Updated Contents

[Ver. 1.10.00] (Jan. 16, 2026)

  • New

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer.
Prior to installation, be sure to close all software applications that are running.

  1. Click on the file name in the lower part of this page to start downloading the file.
  2. After download is complete, double-click on the downloaded file to start installation.
  3. Follow the instructions on the screen.
  4. After installation, start GP-Pro EX.
  5. Select [Pro-face by Schneider Electric] for "Manufacturer" and [DM Link Communication 1:1] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

document
installer
IDEC_DMS.exe
1.17 MB (1,227,496 Byte)
document
Device/PLC Connection Manual
idec_dms.pdf
1.55 MB (1,622,518 Byte)

Update history

[Ver. 1.10.00] (Jan. 16, 2026)

  • New