[Communication Drivers] Azbil Corporation Controller (CPL) Driver


Last Updated : 2023/02/10


Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time
TitleAzbil Corporation Controller(CPL) Driver
VersionVer 1.17.06
Applicable SoftwareThe required versions of software for this driver installer are as follows.
GP-Pro EX Ver 2.10.000 or later
Pro-Server EX Ver 1.30.000 or later
You can check your version by "Help" function -> "Version Info".
Related Devices
  • SDC10 Series
  • SDC15 Series
  • SDC20 Series
  • SDC21 Series
  • SDC25 Series
  • SDC26 Series
  • SDC30 Series
  • SDC31 Series
  • SDC35 Series
  • SDC36 Series
  • SDC40A Series
  • SDC40B Series
  • SDC40G Series
  • SDC45 Series
  • SDC46 Series
  • DMC10 Series
  • DMC50 Series
  • DCP31 Series
  • DCP32 Series
  • DCP551 Series
  • DCP552 Series
  • CMC10B Series
  • PBC Series
  • CMS Series
  • CMF Series
  • CMQ-V Series
  • MPC Series
  • MVF Series
  • CML Series
  • AUR350C Series
  • AUR450C Series
  • RX Series
  • BC-R Series
  • C1M Series
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version(link is external)" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.
ModelRequired driver version
GP3000 SeriesVer. 1.00.01 or later
GP3000 Series (Handy type)Ver.1.12.03 or later
ST3000 SeriesVer. 1.10.01 or later
LT3000 SeriesVer. 1.12.01 or later
GP4100 SeriesGP4105Ver. 1.13.03 or later
GP4115Ver. 1.16.06 or later
GP4100 Series
(Ethernet Multilink only)
GP4104Ver. 1.13.03 or later
GP4114Ver. 1.16.06 or later
GP4000M SeriesVer. 1.14.03 or later
GP4000 SeriesVer. 1.14.03 or later
LT4000M SeriesVer. 1.15.04 or later
SP5000 SeriesVer. 1.15.04 or later
SP5000X SeriesVer. 1.16.06 or later
ST6000 SeriesVer. 1.16.06 or later
IPC Series for WinGPVer. 1.10.01 or later
General PCs for WinGPVer. 1.11.01 or later
Device/PLC Connection ManualFor details, please read the "Device/PLC Connection Manual" in the lower part of this page.
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents

[Ver. 1.17.06] (Feb. 10, 2023)

The following device was supported.
  • C1M Series is supported.

How to install (This is a self-extracting file.)

! Prior to installation, be sure to close all software applications that are running.
  1. Click on the file name in the lower part of this page to start downloading the file.
  2. After download is complete, double-click on the downloaded file to start installation.
  3. Follow the instructions on the screen.
  4. After installation, start GP-Pro EX.
  5. Select [Azbil Corporation] for "Manufacturer" and [Controller (CPL)] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

1.34 MB (1,402,904 Byte)
Device/PLC Connection Manual
10.39 MB (10,895,684 Byte)

Update History

[Ver. 1.17.06] (Feb. 10, 2023)

The following device was supported.
  • C1M Series is supported.

[Ver. 1.16.06]

The following issues have been fixed:
  • Accessing Network Addresses (00000001-0000FFFFh) in DMC50 sometimes caused a communication error.

[Ver. 1.16.05] (Dec. 2, 2014)

The following functions were added:
  • Burner Controller BC-R series is supported.

[Ver. 1.15.04] (Oct. 30, 2012)

The following functions were added:
  • PBC, CMS, CMF, CMQ-V, MPC, MVF, CML, AUR450C, AUR350C, RX series are supported.
  • The manufacturer name and series name are changed.
The following issues have been fixed:
  • The “Reference To Parameter” dialog is hidden in Pro-Server EX.
  • When “120DPI” is specified for the DPI setting on the OS, the button on the “Reference To Parameter” dialog is not displayed.

[Ver. 1.14.03]

The following functions were added:
  • GP4000 Series is supported.
    *To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
  • GP4000M Series is supported.
    *To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.

[Ver. 1.13.03] (May 17, 2010)

The following models were supported:
  • GP4105, GP4106 and GP4107
    *To use GP4105/GP4106/GP4107, GP-Pro EX Ver. 2.60.000 or later is required.
  • GP4104 (Ethernet Multilink)
    *To use GP4104 (Ethernet Multilink), GP-Pro EX Ver. 2.70.000 or later is required.

[Ver. 1.12.03]

The following issue was fixed:
  • The system error may occur in GP-3200/ST3000 series.

[Ver. 1.12.02] (Mar. 3, 2008)

The following setting was added:
  • The parameter reference lists for SDC45 series and SDC46 series are updated.

[Ver. 1.12.01] (Nov. 29, 2007)

The following addition and improvement were performed:
  • SDC45, SDC46, DMC50 and CMC10B series are added to the supported devices.
  • SDC15, SDC25, SDC26, SDC35, SDC36 and DMC10 series are improved in data reading performance.

[Ver. 1.11.01] (Oct. 1, 2007)

The following function was supported:
  • Device Monitor
    * To use a Device Monitor function, GP-Pro EX Ver. 2.00.000 or later is required.