[Communication Drivers] IAI Corporation ELECYLINDER SIO

Summary

Connection of this driver required, [IAI Corporation ELECYLINDER sample project].

Details

Note:
Precautions for adding a new driver onto Windows Vista/7
You can connect to this driver, [IAI Corporation ELECYLINDER sample project] is required
Title IAI ELECYLINDER SIO
Version Ver. 1.10.00
Applicable Software The required versions of software for this driver installer are as follows.
  • GP-Pro EX Ver. 4.00.000 or later
You can check your version by”Help”function→”Version Info”.
Supported Devices ELECYLINDER Series
Supported Units Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Model Required driver version
GP4000 Series Ver. 1.10.00 or later
LT4000M Series Ver. 1.10.00 or later
SP5000 Series Ver. 1.10.00 or later
SP5000X Series Ver. 1.10.00 or later
ST6000 Series Ver. 1.10.00 or later
Device/PLC Connection Manual For details, lease read the technical guide included in the download file of “ IAI ELECYLINDER Connection Sample Project".
For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)"
Updated Contents

[Ver. 1.10.00] (Dec. 6, 2022)

The following setting was added:

  • Correspond to the GP4000 Series of GP-Pro EX V4.09.400 or later.
 

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
  4. After installation, execute GP-Pro EX.

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

Installer :
780.77 KB (799,512Byte)
Last update: 2022/12/06

Updated Contents

[Ver. 1.10.00] (Dec. 6, 2022)

The following setting was added:

  • Correspond to the GP4000 Series of GP-Pro EX V4.09.400 or later.
 


[Ver. 1.10.00] (Jun.24,2021)

The following setting was added:

  • The ST6000 Series were added as Support unit.
 

 [Ver. 1.00.00] (Nov. 1, 2019)

New