{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}{}{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Did this answer your question?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}GPH6000 / How can I display the System Settings?
There are two ways to display the system settings after transferring project files from the screen editing software.
- Display System Settings on the Product Screen
- Display System Settings on the PC Screen : connect the product to a computer and display the System Settings using a web browser on the computer
Display System Settings on the Product Screen
Tap-Tap operation
1) Turn on the product and immediately after the progress bar appears, tap the screen with your finger multiple times.
2) Tap-Tap menu appears at the top of the screen. "SYSTEM SETTINGS" is selected. Wait for 5 seconds without touching the screen.
3) The Tap-Tap menu will switch automatically. "DEFAULTMODE" is selected. Wait for 5 more seconds without touching the screen.
4) The login screen for SYSTEM SETTINGS will be displayed. Enter your username and password.
Display System Settings on the PC Screen
1) Connect your computer to the same network as this product and start a web browser.
2) Enter the URL below.
https://<IP address>/machine_config
NOTE:
- Replace the <IP address> part above with the one you set.
- Remote access uses the encrypted https protocol on port 443.
3) The login screen for SYSTEM SETTINGS will be displayed. Enter your username and password.
