PFXGP4301TADR

Standard product information
Display specifications
Electrical specifications
Environmental specifications
Memory
Interface specifications
Structural specifications
Dimensions

Standard product information

Family

HMI

Series

GP4000R Series

Size

Model

PFXGP4301TADR

Global Code

PFXGP4301TADR

Product Features

Rear Mount 5" DC Analog

Repair Status

✔ (Maintenance service is available, able to be maintained.)

Display specifications

Display type

TFT Color LCD

Display size

5.7"

Resolution

320 x 240 pixels (QVGA)

Effective display area

W115.2 x H86.4 mm [W4.54 x H3.40 in.]

Display colors

65,536 colors (No blink) / 16,384 colors (Blink)

Backlight

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

Brightness control

16 Levels (Adjusted with touch panel or software)

Touch panel type

Resistive Film (analog)

Touch panel resolution

1,024 x 1,024

Touch panel lifetime

1,000,000 times or more

Language fonts

Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese, Simplified Chinese, Thai and Cyrillic can be added from the font setting of the screen editor. )

Character sizes

Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts

Font sizes

Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.^*1

8 x 8 dots

40 char. x 30 rows

8 x 16 dots

40 char. x 15 rows

16 x 16 dots

20 char. x 15 rows

32 x 32 dots

10 char. x 7 rows

1Other font sizes can be set up with the Editor software.

Electrical specifications

Rated input voltage

24 Vdc

Input voltage limits

19.2 to 28.8 Vdc

Allowable voltage drop

5 ms or less

Power consumption

10.5 W or less

In-rush current

30 A or less

Noise immunity

Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications

International safety standards

Surrounding air temperature

0 to 55 °C [32 to 131 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Ambient humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Storage humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Dust

0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s²
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s², X, Y, Z directions for 3 times

Electrostatic discharge immunity

Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

Memory

Application memory

When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 16MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: 8MB
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None

Removable System: No

Backup memory

When using GP-Pro EX:
- Screen Area: SRAM 320KB
- Variable Area: SRAM 64KB

Battery: Replaceable battery / Primary battery for clock data backup

Clock accuracy

±65 sec./month (deviation at room temperature and power is OFF)^*2

2Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

Interface specifications

Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2)

Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub 9 pin (plug)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

SD card

SD Card Slot x 1

Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2mm² (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)

Cooling method

Natural air circulation

Structure

IP67F^*3

External dimensions

W155.6 x H123.4 x D59.7 mm [W6.13 x H4.86 x D2.35 in.]

Panel cut-out dimensions

Standard Mount: W118.8 x H90 mm [W4.68 x H3.54 in.]
Flat Mount: W143 x H109 mm [W5.63 x H4.29 in.]^*4

Weight

1 kg [2.21 lb] or less

3Protection structure equivalent to IP67F can be expected if you affix the Overlay (sold separately) on the screen of the unit and the surroundings. Pro-face does not guarantee the protective structure. Consider the the protective structure in combination with a panel or a resin plate within your quality assurance range. For details, please refer to GP4000 Series Hardware Manual.
Equivalent to IP20 in a standard installation. In a flat installation, protection structure equivalent to IP67F can be maintained by affixing an overlay (sold separately) on the GP screen and its surrounding area. Use the overlay in combination with the protection structure of the panel or resin plate. In a flat installation, if you do not use an overlay, protection is equivalent to IP20.

4As for dimensional tolerance everything +0.5/-0 mm [+0.02/-0 in.] and R in angle are below R1 [R0.04in.]

Dimensions

External dimensions

Panel Type/Standard Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

Panel Type/Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

Resin Boss Type/Standard Mount, Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

Panel cut-out dimensions

Standard Mount (Panel Type/Resin Boss Type)

a)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d)		4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e)		Center of the display area

A	B	C		R
A	B	Panel Type *1	Resin Boss Type *2	R
118.8mm (+0.5, -0mm) (4.68in. [+0.02, -0in.])	90mm (+0.5, -0mm) (3.54in. [+0.02, -0in.])	1.6mm (0.06in.) to 3.2mm (0.13in.) (SPCC "JIS G3141" or SECC "JIS G3313") 1.5mm (0.06in.) to 6mm (0.24in.) (SUS304 "JIS G4304, JIS G4305")	2mm (0.08in.) or more	1mm (0.04in.) maximum

Note: If you are designing the panel with a material other than sheet metal, ensure that the material has sufficient strength.

*1 Panel type: Weld the stud bolts to the panel, and then tighten the nuts to fasten the GP unit to the panel.
*2 Resin boss type: Tighten the screws to attach the GP unit to the bosses of the resin boss-molded product.

Attaching Installation Brackets on the Top and Bottom Surfaces of the GP Unit		Attaching Installation Brackets on the Sides of the GP Unit
X1	Y1	X2	Y2
43 (±0.15) [1.69, (±0.01)]	69.5 (±0.15) [2.74, (±0.01)]	85.6 (±0.15) [3.37, (±0.01)]	43 (±0.15) [1.69, (±0.01)]

Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.

Flat Mount (Panel Type/Resin Boss Type)

a)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d)		4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e)		Center of the display area

A		B	C		R
A1	A2	B	Panel Type *1	Resin Boss Type *2	R
143mm (+0.5, -0mm) (5.63in.[+0.02, -0in.])		109mm (+0.5, -0mm) (4.29in. [+0.02, -0in.])	1.6 mm (0.06in.) (SPCC "JIS G3141" or SECC "JIS G3313") 1.5 mm (0.06in.) (SUS304 "JIS G4304, JIS G4305")	2 mm (0.08in.) maximum	1 mm (0.04in.) maximum
70.5mm (+0.25, -0mm) (2.78in. [+0.01, -0in.])	72.5mm (+0.25, -0mm) (2.85in. [+0.01, -0in.])	109mm (+0.5, -0mm) (4.29in. [+0.02, -0in.])		2 mm (0.08in.) maximum	1 mm (0.04in.) maximum

Attaching Installation Brackets on the Top and Bottom Surfaces of the GP Unit		Attaching Installation Brackets on the Sides of the GP Unit
X1	Y1	X2	Y2
43 (±0.15) [1.69, (±0.01)]	69.5 (±0.15) [2.74, (±0.01)]	85.6 (±0.15) [3.37, (±0.01)]	43 (±0.15) [1.69, (±0.01)]

Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.

External dimensions with cable

Panel Type (Standard, Flat Mount) / Resin Boss Type (Standard Mount)

NOTE: All the above values are designed with cable bending in mind. The dimensions given here are representative values depending on the type of connection cable in use. Therefore, these values are intended for reference only.