Standard product information
GP4000M Series
None Display
Global Code 
Product Features 
Rear Module
Repair Status 
- (Maintenance service is not available. Replace with a new unit under warranty.)

Display Specifications

Virtual Resolution (pixels) 320 x 240 (QVGA)
Language Fonts *1 Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters),
ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.
Character sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts,
Stroke font: 6 to 127 pixel fonts,
Image font: 8 to 72 pixel fonts
Font sizes Standard font: Width can be expanded up to 8 times.
Height can be expanded up to 8 times. *2
8 x 8 pixels 40 characters per row x 30 rows
8 x 16 pixels 40 characters per row x 15 rows
16 x 16 pixels 20 characters per row x 15 rows
32 x 32 pixels 10 characters per row x 7 rows
Application memory FLASH EPROM 8 MB *3
Logic Program Area FLASH EPROM 132 KB *4
(Equivalent to 15,000 steps)
(when limit exceeded, uses application memory)
Data backup nvSRAM 128 KB *5
Clock Accuracy Uses the clock of an external device *6
Touch Panel Type Resistive Film (analog)
Touch Panel Service Lifetime 1,000,000 times or more
Interface Serial (COM1) Asynchronous Transmission: RS-232C/422/485,
Data Length: 7 or 8 bit, Stop Bit: 1 or 2 bit,
Parity: none, Odd or Even,
Data Transmission Speed: 2,400 to 115,200bps, 187,500 bps,
Connector: D-Sub9 (plug)
Ethernet (LAN) IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX,
Connector: Modular jack (RJ-45) x 1
USB (Type A) USB2.0, Connector: Type A x 1,
Power Supply Voltage: DC5V±5%,
Maximum Transmission Distance: 3m (9.84 ft.) or less
USB (mini-B) USB2.0, Connector: mini-B x 1,
Maximum Transmission Distance: 5m (16.40 ft.) or less
  • *1 Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  • *2 Other font sizes can be set up with the Editor software.
  • *3 Capacity available for user application. The capacity depends on how many fonts you load from Editor software.
  • *4 Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1MB.
  • *5 Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  • *6 Set up the "Clock Updates" feature with the Editor software. Please refer to the GP-Pro EX reference manual "Common" - "Clock Update Settings" for details.

General Specifications

Supported Standards
and Regulations
UL   UL   cUL   CE   ATEX   KC   C-tick   Gost-R
Rated Input Voltage 24Vdc
Input Voltage Limits 20.4 to 28.8Vdc
Acceptable Voltage Drop 7ms or less
Power Consumption 5.2W or less
In-Rush Current 30A or less
Voltage Endurance 1,000 Vac 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

Surrounding Air Temperature 0 to 50 ℃ (32 to 122 ℉)
Storage Temperature -20 to 60 ℃ (-4 to 140 ℉)
Ambient Humidity 85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉)
or less - no condensation.)
Storage Humidity 85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉)
or less - no condensation.)
Dust 0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure (altitude range) 800 to 1,114 hPa (2,000 m (6,561 ft) or lower)
Vibration Resistance EN61131-2 compliant
5 to 9 Hz Single amplitude: 3.5 mm (0.14 in.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z 3directions
Electrical fast
2kV Power port
1kV Signal ports
Electrostatic Discharge Immunity IEC61000-4-2
6kV direct contact
8kV air contact

Structural Specifications

Structure IP20 (NEMA Type 4X not supported)
Cooling Method Natural air circulation
Weight 0.21kg (0.46 lb.) or less
Grounding Functional grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14)
or thicker wire, or your country's applicable standard.

External Dimensions

GP4000M Rear Module

DIN Rail Attached Demention

GP4000M Rear Module