Standard product information
GP4000M Series
Global Code 
Product Features 
Modular 5" DC Analog
Repair Status 
Replace with a new unit.
Display specifications
Display type 
Display size 
320 x 240 pixels (QVGA)
Effective display area 
W115.2 x H86.4 mm [W4.54 x H3.40 in.]
Display colors 
65,536 Colors
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
16 Levels (Adjusted with touch panel or software)
Touch panel type 
Resistive Film (analog)
Touchpanel lifetime 
1,000,000 times or more
Language fonts 
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.)
Character sizes 
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes 
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
8 x 8 dots 
40 char. x 30 rows
8 x 16 dots 
40 char. x 15 rows
16 x 16 dots 
20 char. x 15 rows
32 x 32 dots 
10 char. x 7 rows

1Other font sizes can be set up with the Editor software.

Electrical specifications
Rated input voltage 
24 Vdc
Input voltage limits 
20.4 to 28.8 Vdc
Allowable voltage drop 
7 ms or less
Power consumption 
6.8 W or less
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more (between charging and FG terminals)
Environmental specifications
International safety standards 
Surrounding air temperature 
0 to 50 °C [32 to 122 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
85 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
85 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant, 5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
Noise immunity 
IEC61000-4-4, 2kV Power port, 1kV Signal ports
Electrostatic discharge immunity 
IEC61000-4-2, 6 kV direct contact, 8 kV air contact
Drop resistance 
IEC/EN 61131-2 compliant, 147 m/s2, x,y,z 3 directions
Application memory 
Clock accuracy 
Uses the clock of an external device*4

2Capacity available for user application. The capacity depends on how many fonts you load from Editor software.

3Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.

4Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX reference manual “Common” - “Clock Update Settings” for details.

Interface specifications
Serial (COM1) 
Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Parity: None, Even or Odd, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub9 (plug)
USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Communication distance: 3 m [9.84 ft.] or less
USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
Structural specifications
Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).
Cooling method 
Natural air circulation
NEMA#250 TYPE 4X (indoor, installed in an enclosure)
Display module: IP65F
Rear module: IP20
0.62 kg [1.37 lb] or less
External dimensions 

External Dimensions / Interfaces / Panel Cut-out