Notification to customers using OMRON Corporation CS/CJ/NJ series EtherNet/IP driver

Posted: May 17, 2017

Thank you very much for your continuous use of Pro-face products.
We have confirmed the following symptoms on OMRON CS/CJ/NJ series Ethernet/IP driver.
The symptom and corrective measures for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.

Symptom Descriptions

Symptom 1: A part of tag is not imported when importing a tag file after OMRON CS/CJ/NJ Ethernet/IP driver is updated from Ver. 1.16.11 to Ver. 1.16.12.
Symptom 2: HMI might not start correctly if transferred project file has two or more tag data.

Applicable Communication Driver

The following communication driver is applicable.

Driver Name OMRON CS/CJ/NJ series Ethernet/IP
Target Version *1 Symptom 1: Ver. 1.16.12
Symptom 2: Ver. 1.16.11 to Ver. 1.16.13.
How to confirm the version Peripheral List in GP-Pro EX or Offline menu of HMI

*1 OMRON CS/CJ/NJ Ethernet/IP driver Ver. 1.16.12 is included in the installation module of GP-Pro EX Ver. 4.06.300.


Please download the module of OMRON CS/CJ/NJ Ethernet/IP driver (Ver. 1.16.14) from the following page and apply it to your GP-Pro EX.

* To download the module, free member registration is required.


If you have any inquiries, please contact our sales office in your region.