詳細資訊
| 標題 | 西門子公司 TIA Portal Ethernet 驅動程式 | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 版本 | Ver. 1.17.23 | ||||||||||||||||||||||
| 支援軟體 | 此驅動程式安裝程式所需的軟體版本如下。
您可以透過「說明」功能 → 「版本資訊」查看您的版本。 | ||||||||||||||||||||||
| 支援設備 |
| ||||||||||||||||||||||
| 支援單元 | 所需版本取決於型號。
| ||||||||||||||||||||||
| 設備/PLC連接手冊 | 詳細資訊請閱讀本頁面下方的「設備/PLC連接手冊」。 關於設備連接和文件慣例的一般資訊，請參閱「設備/PLC連接手冊」。 | ||||||||||||||||||||||
| 更新內容 | [Ver. 1.17.23] (2025年6月27日) 支援以下功能：
| ||||||||||||||||||||||
| 注意事項 | 使用GP-Pro EX Ver. 4.06.000之前的版本時，每次執行標籤匯入後，請確保透過「全部傳輸專案」來傳輸GP-Pro EX專案。 | ||||||||||||||||||||||
| 限制 | 根據匯入的TIA Portal專案資料大小，傳輸GP-Pro EX專案資料可能會失敗。即使傳輸完成，顯示器啟動時也可能顯示錯誤訊息。在這種情況下，請從要匯入的TIA Portal專案中刪除未使用的標籤。然後請嘗試重新匯入。 |
安裝方法（這是自解壓縮檔案）
安裝前，請確保關閉所有正在運行的軟體應用程式。
- 點擊上述檔案名稱，將資料下載到所需資料夾。
- 下載到您的PC完成後，雙擊檔案圖示以啟動安裝程式。
- 安裝程式啟動後，按照每個畫面上的指示進行。
- 安裝完成後，執行GP-Pro EX。
- 在[專案]選單的[系統設定]中的[設備/PLC]設定中，選擇「製造商」為[西門子公司]，「系列」為[TIA Portal Ethernet]。
使用驅動程式時，請務必參考設備連接手冊PDF（如上所示）。此外，關於設備連接和文件慣例的一般資訊，請參閱「設備/PLC連接手冊」。
使用條款 / 注意事項
使用我們的下載服務前，請先確認以下使用條款。
下載任何檔案即表示您同意使用條款。
條款和條件
下載檔案
更新歷史
[Ver. 1.17.23] (Jun. 27, 2025)
支援以下功能：
- TIA Portal V20
[Ver. 1.17.22] (Apr. 11, 2025)
支援以下功能：
- TIA Portal V19
- Support to import datatype for WSTRING
[Ver. 1.17.19]
支援以下功能：
- Support to import datatype for LREAL
[Ver. 1.17.18] (Aug. 31, 2023)
支援以下功能：
- TIA Portal V17
- Password setting of PLC
[Ver. 1.16.17]
修正以下問題：
- Fixed importing issue
[Ver. 1.16.15]
修正以下問題：
- Fixed tag sort issue
[Ver. 1.16.13] (Mar. 17, 2022)
修正以下問題：
- The display was sorted at an unintended timing in the TAG selection dialog.
[Ver. 1.16.11] (Aug. 31, 2021)
支援以下功能：
- TIA Portal V17
[Ver. 1.15.11]
支援以下功能：
- Improve the problem that the TAG name is not displayed in the error message.
[Ver. 1.15.10]
支援以下功能：
- Improved the problem that EX aborts when the edit button is clicked when customizing TAG.
- An error message is supported when importing tags of unsupported PLC type.
- ST6000 series is added as supported unit.
[Ver. 1.15.09] (Apr. 24, 2020)
支援以下功能：
- TIA Portal V16
- Communication with latest firmware version of each PLC.
[Ver 1.14.09] (Nov. 29, 2019)
支援以下功能：
- There was problem of force termination in GP-Pro EX, when import it if TIA portal project has FB instance into the FB instance member.
[Ver 1.14.08] (July. 30, 2019)
支援以下功能：
- The mode is changed to overwrite from skip if tags already registered when import.
The following issue was fixed.
- An unknown address error was displayed if set multiple nodes on Ver.1.14.07.
[Ver 1.14.07]
支援以下功能：
- Reduce memory usage by import with filtering necessary tag information.
The following issue was fixed.
- By supported to TIA Portal V15.1, some projects become impossible import.
[Ver 1.14.06]
支援以下功能：
- Support the function block (FB) as data type.
[Ver 1.14.05] (Mar. 29, 2019)
The following feature was supported.
- TIA portal V15.1
- Import project with including group
The following issue was fixed.
- The import process was canceled in V1.13.02 or later, In the case importing a project with including data type "Timer", if the selected PLC does not support this data type.
[Ver 1.13.04]
The following issue was fixed.
- In the Individual Device Settings dialog box, using [Edit] to import tags sometimes caused variables used by parts on the screen to become "Undefined".
[Ver 1.13.03] (Jul. 5, 2018)
The following feature was supported.
- The indicator for limitation size of TIA portal project was added on Individual Device Setting.
[Ver 1.13.02] (May 14, 2018)
The following feature was supported.
- TIA Portal V15
The following issue was fixed.
- Some TIA Portal projects cannot be opened when importing the TIA Portal project.
[Ver 1.12.02 (Included in GP-Pro EX Ver. 4.07.300)]
The following feature was supported.
- TIA Portal V14
[Ver 1.11.01 (Included in GP-Pro EX Ver. 4.07.000)]
The following issues were fixed.
- Importing the unnamed structure was failed.
- Some TIA Portal projects cannot be opened when importing the TIA Portal project.
[Ver 1.11.01] (Mar. 13, 2017)
The following models were supported.
- GP4100 Series (GP4114)
- GP4000 Series
- GP4000H Series
- SP5000 Series (SP5B10)
The following issue is fixed:
- Grouped Data blocks and PLC tags cannot be imported.
[Ver 1.10.00] (Jul. 28, 2016)
New
[Ver. 1.17.18] (Aug. 31, 2023)
The following feature was supported:
- TIA Portal V17
- Password setting of PLC
[Ver. 1.16.17]
The following issue was corrected:
- Fixed importing issue
[Ver. 1.16.15]
The following issue was corrected:
- Fixed tag sort issue
[Ver. 1.16.13] (Mar. 17, 2022)
The following issue was corrected:
- The display was sorted at an unintended timing in the TAG selection dialog.
[Ver. 1.16.11] (Aug. 31, 2021)
The following feature was supported.
- TIA Portal V17
[Ver. 1.15.11]
The following feature was supported.
- Improve the problem that the TAG name is not displayed in the error message.
[Ver. 1.15.10]
The following feature was supported.
- Improved the problem that EX aborts when the edit button is clicked when customizing TAG.
- An error message is supported when importing tags of unsupported PLC type.
- ST6000 series is added as supported unit.
[Ver. 1.15.09] (Apr. 24, 2020)
The following feature was supported.
- TIA Portal V16
- Communication with latest firmware version of each PLC.
[Ver 1.14.09] (Nov. 29, 2019)
The following feature was supported.
- There was problem of force termination in GP-Pro EX, when import it if TIA portal project has FB instance into the FB instance member.
[Ver 1.14.08] (July. 30, 2019)
The following feature was supported.
- The mode is changed to overwrite from skip if tags already registered when import.
The following issue was fixed.
- An unknown address error was displayed if set multiple nodes on Ver.1.14.07.
[Ver 1.14.07]
The following feature was supported.
- Reduce memory usage by import with filtering necessary tag information.
The following issue was fixed.
- By supported to TIA Portal V15.1, some projects become impossible import.
[Ver 1.14.06]
The following feature was supported.
- Support the function block (FB) as data type.
[Ver 1.14.05] (Mar. 29, 2019)
The following feature was supported.
- TIA portal V15.1
- Import project with including group
The following issue was fixed.
- The import process was canceled in V1.13.02 or later, In the case importing a project with including data type "Timer", if the selected PLC does not support this data type.
[Ver 1.13.04]
The following issue was fixed.
- In the Individual Device Settings dialog box, using [Edit] to import tags sometimes caused variables used by parts on the screen to become "Undefined".
[Ver 1.13.03] (Jul. 5, 2018)
The following feature was supported.
- The indicator for limitation size of TIA portal project was added on Individual Device Setting.
[Ver 1.13.02] (May 14, 2018)
The following feature was supported.
- TIA Portal V15
The following issue was fixed.
- Some TIA Portal projects cannot be opened when importing the TIA Portal project.
[Ver 1.12.02 (Included in GP-Pro EX Ver. 4.07.300)]
The following feature was supported.
- TIA Portal V14
[Ver 1.11.01 (Included in GP-Pro EX Ver. 4.07.000)]
The following issues were fixed.
- Importing the unnamed structure was failed.
- Some TIA Portal projects cannot be opened when importing the TIA Portal project.
[Ver 1.11.01] (Mar. 13, 2017)
The following models were supported.
- GP4100 Series (GP4114)
- GP4000 Series
- GP4000H Series
- SP5000 Series (SP5B10)
The following issue is fixed:
- Grouped Data blocks and PLC tags cannot be imported.
[Ver 1.10.00] (Jul. 28, 2016)
New
摘要
最後更新：2025/6/27