펄스 출력/ PWM출력 전류
50 mA/point, 100 mA/common
절연 저항 [고속 출력과 내부 회로 사이]
10 MΩ or more
절연 저항 [전원 포트와 보호 접지 (PE)=DC500V 사이]
10 MΩ or more
잔류 전압 [for I = 0, 1 A]
1.5 Vdc以下
Delay
Off to on (50 mA load): 1.1 ms
On to off (50 mA load): 1.1 ms
NOTE: The delay is not including the cable delay.
Accuracy Pulse Output/ PWM Output [10 to 100 Hz]
Accuracy: 0.1%
Duty: 0 to 100 %
Accuracy Pulse Output/ PWM Output [10 to 1000 Hz]
Accuracy: 1%
Duty: 1 to 99 %
Accuracy Pulse Output/ PWM Output [1.001 to 20kHz]
Accuracy: 5%
Duty: 5 to 95 %
Accuracy Pulse Output/ PWM Output [20.001 to 45kHz]
Accuracy: 10%
Duty: 10 to 90 %
Accuracy Pulse Output/ PWM Output [45.001 to 65 kHz]
Accuracy: 15%
Duty: 15 to 85 %
케이블 (타입)
Shielded, including 24 Vdc power supply
케이블 (길이)
Maximum 5 m (16 ft)
단자대
Type: 3.5 mm (0.137 in.) pitch
Terminal blocks are removable.
Note1
NOTE: When using the acceleration/deceleration pulse output, there is a 1% maximum error for the frequency.
Note2
Caution: Q0 and Q1 circuits are push-pull circuits. The following is the operation of the push-pull circuit at the Sink Output and the Source Output.
Sink Output: +24(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off
Source Output: 0(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off
Standard Output terminals Q2 or later are common open collector outputs.
Do not connect Fast Output terminals Q0, Q1 and Standard Output terminals Q2 or later. It will short.
Note3
Type: 3.5 mm (0.137 in.) pitch
Terminal blocks are removable.
