The following are the precautions for the GPH6000 series.
The display unit is equipped with System Settings separate from offline mode. For information about the System Settings, refer to the GPH6000 Series hardware manual.
Configure the following in the System Settings, not in offline mode.
Main Unit - Ethernet settings
Maintenance Menu - Calibrate Touch Panel
The Date & Time in the System Settings synchronizes with the Time Setting in offline mode. We recommend adjusting the time setting in offline mode after the project file is transferred.
M.2.2 Adjusting the clock on the Display
We recommend using the Port Control feature in GP-Pro EX to control communication and prevent unauthorized access.
M.17.4.4 Security Settings - Port Control
Do not use the following Ethernet port numbers in a project file because these Ethernet port numbers are used by the display unit system.
3000
4804
8001
8080
When the backlight is OFF (standby mode), the status LED flashes in green (ON/OFF every 3 seconds).
For the features supported and unsupported by GPH6000 Series, refer to Supported Features.
1.5.10 Hand-held GP
In addition to the contents listed in the Supported Features, the following limitations apply.
You cannot use bar code readers or two-dimensional code readers.
You cannot print display unit screens or saved data by connecting a printer to the display unit.
When communicating with external equipment, even if you set the communication format to RS-232C, you cannot set up the 5V power supply.
4.4.18 System Settings [Script I/O] Settings Guide
Not compatible with the DOUT output on the optional GP3000H Conversion Adapter (AGP3000H-ADPCOM-01).
4.4.3 System Settings [Display Unit] - [Operation] Settings Guide
The following Transfer Tool functions are not supported.
Display Unit Information - Display Unit
Memory Loader
Maintenance Menu - In offline mode, Memory Info does not display the NAND USE/TOTAL information.
M.17.6.6 Maintenance Menu - Memory Info