Target Settings
Target
| Property | Description | Data Type | Minimum Value | Maximum Value | Read | Write | ||||||||||||||||||||
DateAndTime.Date |
Stores the date on the target.*1 | Date | 01/01/1970 00:00:00 | 12/31/2037 15:00:00 |  |
|
||||||||||||||||||||
| DateAndTime.Time | Stores the time on the target.*1 | TimeOfDate | 01/01/1970 00:00:00 | 12/31/2037 15:00:00 | |
|
||||||||||||||||||||
| DateAndTime.DateTime | Stores the date and time on the target.*1 | DateAndTime | 01/01/1970 00:00:00 | 12/31/2037 15:00:00 | |
|
||||||||||||||||||||
| DateAndTime.Year | Stores the year on the target.*1 | Integer | 1970 | 2037 | |
|
||||||||||||||||||||
| DateAndTime.Month | Stores the month on the target.*1 | Integer | 1 | 12 | |
|
||||||||||||||||||||
| DateAndTime.Day | Stores the date on the target.*1 | Integer | 1 | 31 | |
|
||||||||||||||||||||
| DateAndTime.Hour | Stores the hours on the target.*1 | Integer | 0 | 23 | |
|
||||||||||||||||||||
| DateAndTime.Minute | Stores the minutes on the target.*1 | Integer | 0 | 59 | |
|
||||||||||||||||||||
| DateAndTime.Second | Stores the seconds on the target.*1 | Integer | 0 | 59 | |
|
||||||||||||||||||||
| DateAndTime.DayOfTheWeek | Stores the day of the week on the target. | Integer | 0 | 6 | |
- | ||||||||||||||||||||
| Preferences.ScreenID | Stores the ID of the current screen. | Integer | 1 | 9999 | |
|
||||||||||||||||||||
| Preferences.ColorSetID | Stores the project theme's color set.
|
Integer | 1 | 1000 | |
|
||||||||||||||||||||
| Preferences.Brightness | Stores the touch panel brightness.
Range:
(Except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT) |
|||||||||||||||||||||||||
| Preferences.LanguageID | Stores the current language ID. See the Language Table editor for list of languages and associated IDs. | |||||||||||||||||||||||||
Preferences.BacklightOff |
If you set this property ON, the back light of the touch panel
turns off.
(Except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT) |
|||||||||||||||||||||||||
Preferences.USBStorage.Status |
Displays the USB memory status.
(Except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT) |
|||||||||||||||||||||||||
| Preferences.SDCard.Status | Displays the SD card status.
(SP5000 Series Power Box only) |
|||||||||||||||||||||||||
| Preferences.SystemKeypad.Status | Displays the system keypad status. | |||||||||||||||||||||||||
| Preferences.KeepRuntimeData.UserManagement | Stores the setting for keeping or overwriting user management data settings during File System transfer. | |||||||||||||||||||||||||
| Preferences.KeepRuntimeData.EthernetSettings | Stores the setting for keeping or overwriting Ethernet settings during File System transfer. (Ethernet supported models except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT) |
|||||||||||||||||||||||||
| Preferences.SerialNumber | Displays the serial number of the display unit. (ST6000 Series, STM6000 Series, and GP-4100 Series only) |
|||||||||||||||||||||||||
Preferences.FileManagement.Status |
Displays the File Management status. When copy and paste is in operation, the value of this property is ON. (Except the GP-4100 Series) |
|||||||||||||||||||||||||
Preferences.WebViewer.ConnectedClients |
Displays the number of Web Viewer clients connected to the HMI server (display unit). (Except the GP-4100 Series) |
|||||||||||||||||||||||||
Preferences.WebViewer.RemainedLockoutSeconds |
A Web Viewer client is interacting with the HMI and therefore locking out other clients. After the client is idle, this property counts down the number of seconds until the lockout is released. (Except GP-4100 Series) |
|||||||||||||||||||||||||
Preferences.InputCompletedFromUSBBarcodeReader |
Displays the data input status of a USB barcode reader. The value of this source property is set ON when data read by a USB barcode reader is input to a variable. After this source property value is set ON, manually turn it back OFF so you can confirm completion of the next input. (This property value is NOT turned OFF automatically.) |
|||||||||||||||||||||||||
Preferences.UWF.Status |
Displays the status of the Windows® Unified Write Filter. 0: UWF is either not installed or UWF is disabled. 1: UWF is enabled (and the volume is protected from write operations). (SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT only)
|
|||||||||||||||||||||||||
Ethernet1.MACAddress |
Displays the MAC address for Ethernet port 1. (Models with Ethernet port 1, except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series, PC/AT and models without Ethernet) |
|||||||||||||||||||||||||
Ethernet2.MACAddress
|
Displays the MAC address for Ethernet port 2. (Models with Ethernet port 2, except the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series and PC/AT) |
|||||||||||||||||||||||||
| SecuritySettings.CurrentUserName | Displays the current user name. | |||||||||||||||||||||||||
SecuritySettings.CurrentUserGroupName |
Displays the current group name. | |||||||||||||||||||||||||
| SecuritySettings.CurrentSecurityLevel | Displays the current security level. | |||||||||||||||||||||||||
| SecuritySettings.UserNameEnter | Set the user name used for login. Setting value is cleared after login operation. | |||||||||||||||||||||||||
| SecuritySettings.PasswordEnter | Set the password used for login. Setting value is cleared after login operation. | |||||||||||||||||||||||||
| SecuritySettings.CurrentUserAvailableDay | Displays the number of days remaining until you have to change the password. | |||||||||||||||||||||||||
| SecuritySettings.AutoPopupDialog | Displays the login screen when you touch an object that has a security level higher than the logged-in user. | |||||||||||||||||||||||||
| SecuritySettings.ShowSecurityIcon | Displays an icon on objects that have a higher security level than the logged-in user. | |||||||||||||||||||||||||
| SecuritySettings.LockStatus | Displays the lock status. | |||||||||||||||||||||||||
| WebFunction.WebViewer.PageSettings.NodeName | Displays the node name of the Web Viewer server. You can configure
the node name in the [Node Name] property.
[Node Name] (Except GP-4100 Series) |
*1 When writing to the SP5000 Series Open Box (Windows 10 IoT Enterprise Model), IPC Series or PC/AT, operate with the user rights that allow you to change the system time.
FTP
| Property | Description | Data Type | Minimum Value | Maximum Value | Read | Write |
Client.Status.ActiveClients |
The number of sessions currently connected to the FTP server. |
Integer | 0 | 1 | |
- |
Connection[*].LastStatus * is the ID of the FTP connection. |
Results of [Remote File Management] operations for each FTP connection. See List of LastStatus Values below for more information. This value is initialized to 0 when performing the [Remote File Management] operation. |
Integer | - | - | |
- |
Connection[*].Terminate * is the ID of the FTP connection. |
Forcibly terminates the FTP connection with the server. Changing the value from 0 (OFF) to 1 (ON) forces the connection to terminate. Even if you change the value from 1 to 0 in the middle of the forced termination, the termination process cannot stop. This value is initialized to 0 when performing the [Remote File Management] operation. |
Bool | 0 | 1 | |
|