For information about the IPC Series status LED, refer to its hardware manual.
| Color | Indicator | Operation |
| Green | ON | In operation |
| Flashing (repeat ON for 1.2 seconds and OFF for 0.4 seconds) | STM-6B00D: Recoverable system error (e.g. communication error)*1*2 |
|
| Flashing (repeat ON and OFF every 0.4 seconds) | STM-6B00D: Project file transferring | |
| Flashing (after OFF for 2.8 seconds, repeat 5 times ON and OFF every 0.4 seconds) | STM-6B00D: Irrecoverable system error (e.g. Write command error)*1 | |
| Flashing once every 5 seconds | Backlight OFF (Standby Mode) | |
| Orange | Flashing | Software starting up or in Recovery Mode |
| Red | ON | Power is ON. |
Double flash |
Display Module connection error | |
– |
OFF |
Power is OFF. |
*1 For more information on error messages, refer to the following.
*2 When error is recovered, flashing ends.
| Color | Indicator | Operation |
| Green | ON | In operation |
| Flashing once every 5 seconds | Backlight OFF (Standby Mode) | |
| Orange | Flashing | Software starting up or in Recovery Mode |
| Red | ON | Power is ON. |
– |
OFF |
Power is OFF. |
| Color | Indicator | Operation |
| Green | ON | In operation |
| Orange | Flashing | Software starting up or in Recovery Mode |
| Red | ON | Power is ON. |
Red/Green |
Alternating |
Display Module connection error |
Orange/Red |
Alternating |
SP-5B10, SP-5B90: SD card boot error |
– |
OFF |
Power is OFF. |