Properties (Screen)

Set the ID of the screen. In the Project Explorer, displays as S*****.

Setting Value Range:1 - 19999

Set the navigation switch appears on navigation.

Select the label for Left Navigation and Icon Navigation switches which navigate to the current screen.

Note: To enable displaying a label on the navigation switch, in the Properties screen for Left Navigation or Icon Navigation, the [Show Label] check box must be selected. The Properties screen appears when [Screen Design] > [Screens] is selected in the Project Explorer.

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Language Table Text]

For more information of Data Binding concept, refer to the following.
Data Binding

Select the image for Left Navigation and Icon Navigation switches which navigate to the current screen. Click the ellipsis [...] and select the image.

Note:

To enable displaying an image on the navigation switch, in the Properties screen for Left Navigation or Icon Navigation, the [Show Icon] check box must be selected. The Properties screen appears when [Screen Design] > [Screens] is selected in the Project Explorer.
The supported format is *.png.

Set the security level for the navigation switch to the self screen, which appears in Left Navigation and Icon Navigation.
Please note that this is not the security level of the screen itself. Additionally, this setting does not apply to slide navigation switches.

Setting Value Range:0 - 65535