Properties (Master Screen)

[Enable Header]

Select the check box to display a common header on all screens belonging to the same folder. Edit the header in the header area of the master screen. As displaying a header decreases the screen area.

Note: For more information of header/footer configuration, refer the following.
Header And Footer

[Header Height]

Set the header height.

[Header Fill]

[Type]

Select how to display colors.

-[None]: Display no color.

-[Solid]: Display a solid color.

-[Blink]: Alternate between 2 colors.

When selecting [Solid]

[Color]

[Value]

Set the display color.
To the right of the item name is the current display color. Click the display color to pop up a color palette. Select the color set up method, either [ID] or [RGB], which appears at the top of the color palette.
-[ID]: From the color palette, select the display color you want to use. The display color is managed using the ID. While ID numbers are the same between color sets, because the display color depends on the color set, if you change the color set the display color will also change.
-[RGB]: Set the display color in RGB format. Either select from the color palette, or enter the RGB value.

Note: For information about color sets, refer to the following.
Color Set

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

[Transparency]

Set the transparency level of the display color.

Setting Value Range: 0 - 100

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

When selecting [Blink]

[Speed]

Select the speed at which the two display colors switch.

[Color]

[Value]

Note: For information about color sets, refer to the following.
Color Set

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

[Transparency]

Set the transparency level of the display color.

Setting Value Range: 0 - 100

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

[Enable Footer]

Select the check box to display a common footer on all screens belonging to the same folder. Edit the footer in the footer area of the master screen. As displaying a footer decreases the screen area.

Note: For more information of header/footer configuration, refer the following.
Header And Footer

[Footer Height]

Set the footer height.

[Footer Fill]

[Type]

Select how to display colors.

-[None]: Display no color.

-[Solid]: Display a solid color.

-[Blink]: Alternate between 2 colors.

When selecting [Solid]

[Color]

[Value]

Note: For information about color sets, refer to the following.
Color Set

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

[Transparency]

Set the transparency level of the display color.

Setting Value Range: 0 - 100

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

When selecting [Blink]

[Speed]

Select the speed at which the two display colors switch.

[Color]

[Value]

Note: For information about color sets, refer to the following.
Color Set

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding

[Transparency]

Set the transparency level of the display color.

Setting Value Range: 0 - 100

Data Binding Support:

When used as a Binding Target, the Binding Sources that can be associated are as follows.
[ Alarm] [ Variable] [ Local Variable] [ Graphical Object] [ Target] [ Equipment] [ Recipe]

For more information of Data Binding concept, refer to the following.
Data Binding