{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}

{}

{}

Search FAQs

Communication Settings on the GP unit

How to enter the OFFLINE mode

---

After power-on Touch the upper right corner or the upper left corner (within 40 pixels of the edge) of the panel for at least 3 seconds soon after the startup screen is displayed.
During operation Touch either the upper right and the lower left corners, or the upper left and the lower right corners (within 40 pixels of the edges) of the panel in this order within 0.5 second.
	The system menu is displayed, then touch [Offline].

Communication Settings

---

	From the OFFLINE mode's [Peripheral Settings] menu, select [Device/PLC Settings]. Select the device/PLC to set up from the list, then touch [Comm.] button.
	Setup the [Data Length] and the [Parity].
	NOTE By transferring project data to the GP, the communication settings will be adjusted to the communication settings set in GP-Pro EX. If you transfer the project data often, please set up the communication settings in GP-Pro EX. → Communication Settings in GP-Pro EX

Published on:3/30/2014Last Modified on:9/29/2021

Did this answer your question?

Yes

No