| Manufacturer | Driver | System Requirement |
| Mitsubishi Electric Corporation | A Series CPU Direct | The following GPP function software package is required;
Windows 2000:
- GX Developer Ver.7 or higher
Windows XP:
- GX Developer Ver.8 or higher |
| Q Series CPU Direct |
| QnA Series CPU Direct |
| QUTE Series CPU Direct |
| FX Series CPU Direct |
| Yaskawa Electric Corporation | MP Series SIO (Extension) | The following engineering tool is required;
- MPE720 Ver.5.38/Ver.6.04 or higher |
| MP Series Ethernet (Extension) |
| Yokokawa Electric Corporation | Personal Computer Link SIO | The following programming tool is required;
- WideField2 R3.01 or higher
| NOTE | | The Pass-Through function can be used only when the display is connected to the programming port on the CPU. |
|
|
| Personal Computer Link Ethernet | The following programming tool is required;
- WideField2 R3.01 or higher |
| OMRON Corporation | CS/CJ Series Host Link | The following programming support tool is required;
- CX-Programmer Version3.00 or higher |
| CS/CJ Series Ethernet | The following programming support tool is required;
- CX-Programmer Version3.00 or higher
| NOTE | | If the High Performance Unit is written by the Pass-Through function, response of the link unit temporarily stops and an error may be displayed on the display. |
|
| Rockwell Automation, Inc. | DF1 | The following programming support tool is required;
- RSLogix500
- RSLogix5000 |
| SIEMENS AG | SIMATIC S7 MPI Direct | The following programming tool is required;
- SIEMENS SIMATIC Software STEP7 Version 5.1 or higher
- STEP7 - Micro/WIN Version 4.0.1.10 or higher |
