{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}

{}

{}

Search FAQs

An error code is displayed on the screen.

Error codes displayed on the display are introduced below.

Major Cause

Error Code

Description and Solution

When communication with the connected device fails	RHxx + 3 digit number	[1.6.2 Display-related errors ♦ Errors displayed when communication fails] Maintenance/Troubleshooting Guide P1-116
During runtime processing	RAAA + 3digit number	[1.6.2 Display-related errors ♦ Errors starting with RAAA (Application errors)] Maintenance/Troubleshooting Guide P1-125
At startup of runtime of the WinGP function	RAAE + 3 digit number	[1.6.2 Display-related errors ♦ Errors starting with RAAE] Maintenance/Troubleshooting Guide P1-133
During communication setting of a runtime program	REAA + 3 digit number	[1.6.2 Display-related errors ♦ Errors starting with REAA] Maintenance/Troubleshooting Guide P1-134
GP is being started	Start up Error: Message	[1.6.2 Display-related errors ♦ Other errors (System errors)] Maintenance/Troubleshooting Guide P1-135
At startup of WinGP	Message	[1.6.2 Display-related errors ♦ At startup of WinGP] Maintenance/Troubleshooting Guide P1-137
Device connected to the DIO board interface is not operating properly	*RGE + 3 digit number**	[1.6.2 Display-related errors ♦ I/O driver errors] Maintenance/Troubleshooting Guide P1-138
During a logic program is running	RGAA001	[1.6.2 Display-related errors ♦ Runtime error] Maintenance/Troubleshooting Guide P1-139
In the case where device that connects to an interface of an internal or external driver fails to operate properly when using LT3000 Series	3 digit number + message	[1.6.2 Display-related errors ♦ I/O driver errors]

Published on:3/30/2014Last Modified on:9/29/2021

Did this answer your question?