{"searchBar":{"inputPlaceholder":"キーワードを入力して「検索」ボタンをクリック","searchBtn":"検索","error":"キーワードを入力してください。"}}

{}

{}

FAQを参照する

FX Series CPU direct by Mitsubishi Electric

When replacing the wire connection (RS-232C) that is used in GP2000/77R/70 series into GP3000 series.

Connect to COM1.

	System Configuraion Diagram of GP2000/77R/70 series


	System Configuration Diagram after the replacement to GP3000 series

	When replacing it into GP3000 series, prepare the following products.

Reminder in replacing GP2000/77R/70 series into GP3000 series *Make sure to read it.

When replacing hardware GP2000/77R/70 series into GP3000 series, there are reminders the following.

About communication Settings

When using GP430-IP11-O in GP3000 series, it is needed to turn VCC on in the access device setting of GP-ProEX.

If VCC is turned off, it's unabled to communicate it.

·The access device setting of GP-ProEX

About built-in 2 port function

In GP3000 series, it is unabled to use built-in 2 port function.
Keep selecting [GP system setting]-[Communication setting]- [Option]-[Built-in 2 port] in GP-PRO/PB3, and convert it to the project file of GP-Pro EX. Then, the following message will be displayed.

About usable devices

For GP-Pro EX, the notation for Bit Set of word devices will be shown below.

Refer to

公開日:2014/3/30最終更新日:2021/9/29

このFAQはお役に立ちましたか？