           3112T Windows 2000 drivers installation instructions  (install2k.txt)    8/5/2004 rev 1.1

Driver installation order after a clean installation of the OS:
 1. Chipset driver
 2. Video driver
 3. Lan driver
 4. Audio/Multimedia driver
 5. Touch screen driver
 6. If you are using 2000-MUI, now load the MUI update.

================================================================

Chipset driver installation instructions:

 - Navigate to this products chipset directory on the driver CD.
 - Run sissetup.exe. This will start the AGP wizard.
 - Restart when prompted.

Video driver  installation instructions:

 - Go to the device manager
 - Right click on "VGA Controller"
 - Select "Properties"
 - Select the "driver" tab.
 - Select "update driver"
 - Click Next
 - Click Next
 - Uncheck the floppy selection, then click Next.
    The wizard should find the driver in the ...\video\win2k&xp\win2000\sis630.inf 
  - Click Next
     Note:  The display will flash a couple times.
 - Click "Finish"
 - Reboot is recommended.

Lan driver  installation instructions:
 - Navigate to the ...\lan\8139C directory on the driver CD.
 - run setup.exe
 - Click Next
 - Click Finish
 - Reboot is recommended.

Audio/Multimedia driver  installation instructions:
 - Go to the device manager
 - right click on Multimedia Audio controller
 - Select "properties"
 - Click the  "reinstall driver" button
 - Next
 - Next
 - Uncheck the floppy selection, then click next.
   The wizard should find the driver  ...\audio\win2000\sis7018.inf
 - Next
 - Click "Finish"
 -  "power cycle" the system.

Touch screen driver  installation instructions:
 - navigate to the ...\touch\driver\windows 2000-xp driver v4.01 directory
 - run the setup.exe.
 - After the setup completes, right click on the PM icon on the lower right toolbar.
 - Select "control panel"
 - Select the "Calibrate" tab
 - Select "standard" calibration
 - Click "OK" after the calibration is complete.

If you are adding the MUI feature to Windows 2000, follow these instructions:
 - Insert the XA_WIN_2K_MUI CD 1 of 2.
 - run muisetup.exe
   Note: You will be prompted to place your install CD in the drive. Use the recovery media CD 
   XA_WIN_2K_PRO. After a few files are copied, you will be prompted to place the MUI
   CD back in the CD drive.
 - A menu of possible languages will be displayed. Select the language(s) needed.
 - Click Next
 - Click Finish
 - Reboot
