**************************   FP5000 Driver & Utility   *************************
                                                                  September 2016
                                                 Digital Electronics Corporation

Preface

Thank you for using FP5000.
These drivers and utilities are required for touch input data communication between
FP5000 and the host, and adjustment of the screen display.
Please visit the Pro-face website (http://www.pro-face.com/) for the latest
product information.

Table of Contents
 (0) Introduction
 (1) Version
 (2) Compatible Operating Systems
 (3) Limitations
  3-1  Drivers
  3-2  Utility (Launcher)
 (4) Manuals
 (5) Fixed Defects

Contents
================================================================================
 (0) Introduction
  Communication driver   : This driver enables communication between FP5000 and
                           the utilities
  Touch panel driver     : This driver sets cursor movement on the target display
                           for touch operations (only when using Windows(R) XP)
  Utility                : The Launcher is a utility that displays icons to
                           configure settings on FP5000 with convenient touch
                           operation.

 (1) Version
  Communication driver      : Ver.1.0.3.0
  Touch panel driver for XP : Ver.1.0.1.0
  Utility                   : Ver.1.00.0013

 (2) Compatible Operating Systems
    These drivers and utilities are compatible to the following operating system
    - Windows(R) XP 32-bit
    - Windows(R) 7 32-bit/64-bit
    - Windows(R) 8 32-bit/64-bit
    - Windows(R) Embedded Standard 2009 for Pro-face products *1
    - Windows(R) Embedded Standard 7 for Pro-face products *1
    *1 For supported models, contact your local distributor.

 (3) Limitations
  3-1  Drivers
      <Driver's installation>
      - Before install this driver for Windows(R) 7, please be sure to install
        - Kernel-Mode Driver Framework version 1.11
        - User-Mode Driver Framework version 1.11
        from Windows Update.
        If failure is displayed at the time of installation of this driver,
        please install in order of a utility (launcher) -> driver. 
      <Driver's Version>
      - When confirming this driver's version, please check in Device Manager
       [Driver detail] -> [file version].
      <Display/Touch Input>
      - FP5000 do not recommend hot swapping of USB and DVI cable.
        Please check the connection of them before turning on the power.

  3-2  Utility (Launcher)
      <.NET Framework 4.0>
      - Before using this program for Windows(R) 7, please be sure to install
        .NET Framework 4.0 patch of (KB2840628v2) in the following HP.

        HP Address : http://www.microsoft.com/en-us/download/details.aspx?id=39509
       <T/P Calibration>
        When doing the touch panel calibration.please set the launcher to the FP5000.
       <Display>
        When adjusting contrast and the black level of the display, please do it
        in graphic property of the host PC. 
       <Tablet PC>
        Please enable "Tablet PC Input Service" on the PC side, before using FP5000.
       <Power saving mode>
        The monitor is turned on by mouse l-button click or touch operation
        when the monitor was turned off by power saving mode.
        The keybord is not able to turns on monitor if OS is Windows XP.
        The configuration of power saving mode is
        [ControlPanel] -> [Power Options] -> [Turn off monitor].

 (4) Manuals
   To view PDF manuals, the Adobe Reader software must be installed on your
   computer. For more information about this drivers and utility, 
   please refer to the FP5000 Series User's Manual.
   User's manual need to be downloaded from our support site "Otasuke Pro!".

 (5) Fixed Defects
   Utility: Ver.1.00.0008
      Drawing area of Launcher was changed. Launcher window never covers taskbar.
      Firmware update function was added and the drivers are installed automatically
      in the installation of Utility.
   Utility: Ver.1.00.0009
      Touch panel calibration become possible to cancel.
      Fix screensaver runs with power saving mode during remote access.
      Fix the communication with FP5000 fails when repeat logoff and logon to Windows.
      Fix the memory leak.
   Utility: Ver.1.00.0010
      Fix the following occur issues when FP5000 only is restarted.
      - Click Buzzer does not work
      - Launcher does not start
      - Backlight become dark when auto brightness is enabled
      - Front LED shows orange blink forever when auto brightness is enabled
   Utility: Ver.1.00.0011
      Supports mouse-compatible operation with the Mouse Emulation Software (DMT-DD)
      in Windows(R) 7 and 8.
      (However, it does not support the extended desktop mode.)
   Utility: Ver.1.00.0012
      Fix the following occur issues when connect Windows(R) XP.
      - Touch operation was impossible when the angle of the display is 90 or 270.
   Utility: Ver.1.00.0013
      Change touch operation to start Launcher for Windows(R) 7, 8.
      The 1st touch point was fixed to left top of screen.
      It depend on rotation angle of screen.

================================================================================
Copyright (C) 2016 Digital Electronics Corporation. All Rights Reserved.
"The Terms and Conditions of Software License Agreement" of Digital Electronics
Corporation do not apply to Adobe Systems products.
All product names in this document are registered trademarks or trademarks of
their respective owners.
Pro-face is a registered trademark of Digital Electronics Corporation in Japan,
U.S.A., Canada, Europe and other areas and countries.
No part of this document may be used or reproduced without permission.
****************************  End of Release Note  *****************************
