You can set operation log recording for each part.
Select the [Enable Operation Log Function] check box on the operation log screen, and then select the [Include in Operation Log] check box on the setting screen for the applicable part.
Applicable parts
|
Bit Switch |
|
|
Word Switch |
|
|
Change Screen Switch |
|
|
Special Switch - Alarm History Switch |
Acknowledge |
|
Clear |
|
|
Special Switch - File Item Switch |
Transfer SRAM -> Device/PLC |
|
SRAM->Transfer to Internal Address |
|
|
Transfer Device/PLC -> SRAM |
|
|
Device/PLC->Transfer to Internal Address |
|
|
Internal Address->Transfer to SRAM |
|
|
Internal Address->Transfer to Device/PLC |
|
|
Special Switch - Data Transfer Switch |
Transfer from CF/USB to the device/PLC (transfer from SD/USB to the device/PLC) |
|
Transfer from the device/PLC to CF/USB (transfer from the device/PLC to SD/USB) |
|
|
Special Switch - Start Monitor Switch |
|
|
Special Switch - Start Application |
|
|
Special Switch - Exit WinGP |
|
|
Special Switch - Start Launcher |
|
|
Special Switch - Reset |
|
|
Special Switch - Offline |
|
|
Special Switch - Operation Lock Special Switch - Security Special Switch - Selector List Switch Special Switch - Ladder Transfer |
Confirmed |
|
Selector Switch |
|
|
Data Display |
Numeric Value |
|
Text |
|
|
Sampled Data |
|
|
Special Data Display |
Show CSV |