Properties (Range Converter)

[Data Type (Source)] / [Data Type (Result)]

Select the data type for source and destination values.

[Range]

Set the number of conversion settings. Setup ranges are added according to the set value, [Range 1], [Range 2], ..., [Else Condition] and conversion settings.

Setting Value Range: 2 - 255

Note:

[Else Condition] is always included as a conversion parameter. The [Else Condition] is applied when the source value does not meet any of the other conversion settings.
When [Data Type (Source)] is set to [Boolean], the [Range] value is fixed to 2.

[Data (Input)] / [Operator] / [Data (Output)]
Set the conversion settings for each range. If the conversion source value matches the parameters for the [Data (Input)] and [Operator], the value is converted as set in [Data (Output)]. If the conversion source value does not match any of the conversion settings, the value is converted as set in [Else Condition] > [Data (Output)] The definition of each operator is as follows. ==: Conversion source value equals the [Data (Input)] value >: Conversion source value is greater than the [Data (Input)] value >=: Conversion source value is greater than or equal to the [Data (Input)] value !=: Conversion source value does not equal the [Data (Input)] value Setting Value Range:-2147483648 (when [Numeric] is selected for the [Data Type (Source)] or [Data Type (Result)]) - 2147483647 (when [Numeric] is selected for the [Data Type (Source)] or [Data Type (Result)])
Note: If the ranges for conversion settings overlap, conversion settings for the smaller number range is applied. When entering characters, select the appropriate language in the font setting of objects where the characters will display. For information on supported languages, refer to the following. Supported Display Languages

[Data (Input)] / [Operator] / [Data (Output)]

Set the conversion settings for each range.
If the conversion source value matches the parameters for the [Data (Input)] and [Operator], the value is converted as set in [Data (Output)].
If the conversion source value does not match any of the conversion settings, the value is converted as set in [Else Condition] > [Data (Output)]
The definition of each operator is as follows.
==: Conversion source value equals the [Data (Input)] value
>: Conversion source value is greater than the [Data (Input)] value
>=: Conversion source value is greater than or equal to the [Data (Input)] value
!=: Conversion source value does not equal the [Data (Input)] value

Setting Value Range:-2147483648 (when [Numeric] is selected for the [Data Type (Source)] or [Data Type (Result)]) - 2147483647 (when [Numeric] is selected for the [Data Type (Source)] or [Data Type (Result)])

Note:

If the ranges for conversion settings overlap, conversion settings for the smaller number range is applied.
When entering characters, select the appropriate language in the font setting of objects where the characters will display.
For information on supported languages, refer to the following.
Supported Display Languages