BLUE User Guide

Click here to see this page in full context

Configuring OPC UA Server Settings

You can view and edit the OPC UA server settings.

Note: For information on the models that support OPC UA server, refer to the following.

Supported Model/Feature List

To set OPC UA server settings:

On the display unit, open the Hardware Configuration screen.
To the right of the [OPC UA Server] field, touch the ellipsis [...] to display the configured OPC UA server.
Set the required settings and tap [Save and Reboot].

Note:

The following properties cannot be updated in the Hardware Configuration screen.
[Certificates List], [Certificate: Save In], [Certificate: Destination Folder]
For information about the OPC UA server properties, refer to the following.
Properties (Target01)

To generate OPC UA certificate:

On the display unit, open the Hardware Configuration screen.
To the right of the [OPC UA Server] field, touch the ellipsis [...] to display the configured OPC UA server.
Touch the [Generate and Reboot] button to generate the certificate and restart the display unit.
Repeat step 1 to 2 and touch the [Export] button to export the certificate to the location shown in the [Certificate: Save In] and [Certificate: Destination Folder] fields.

Note: Once the certificate is regenerated, previously exported OPC UA server certificates become invalid.