Error Code

Error Code	Description
0x01	Function code error
0x02	Invalid register number error
0x03	Invalid quantity error
0x21	Data setting error
0x22	Write mode error
0x23	Main circuit undervoltage (UV) error during write
0x24	Write error during processing of constants

Error Code	Description
0x01	Function Code Error Unsupported function code or sub function code in use.
0x02	Faulty Register Number Accessing register number that is not registered.
0x03	Faulty Quantity The number of read or write data for reading is not between one and the maximum quantity (as defined per model). In write mode, the number of data in the message is not the specified quantity.
0x30	Faulty Register Number (High Level) Accessing register number that is not registered.
0x31	Access Limit Error Access to the specified register is not permitted.
0x32	Outside Setting Range Error The write data value is outside the maximum and minimum limit.
0x33	Data Matching Error Tried to access only a portion of registers in the multiple register unit. Tried to access multiple registers that exceed the register group.
0x34	Condition Error Command message content cannot be processed due to the condition defined by the register.
0x35	Process Conflict Error Cannot be processed due to priority issues with other channels.
0x36	Axis number error (Σ-7W/Σ-7C series only) The extended address is using an axis number that is not available.

Error Code	Description
0x01	Function Code Error Unsupported function code or sub function code in use.
0x03	Faulty Quantity The data count in read or write operations is outside the allowed range (1 to the maximum, as defined per model). In write mode, the data count in the message does not match the specified quantity.
0x04	Data Type Error Not supported by the defined mode or data type.
0x09	Process Conflict Error Cannot process due to priority issues with other channels.
0x81	Protocol ID Setting Error When running a vendor specific command, the protocol ID did not match the I/O.
0x82	Data Length Setting Error When running a vendor specific command, the data length setting for the vendor special area does not match the I/O.
0x83	Vendor Special Area Error When running a vendor specific command, a vendor special error occurred in the vendor special area.

Example:

Error code = 0x83, and the vendor special error code = 0x01, it is displayed 83,01.

Vendor special error code

Error Code	Description
0x01	Model code error The specified model code does not match the I/O.
0x02	Specified channel error The I/O does not support the specified channel.
0x03	Setting command error The I/O does not support the setting command.
0x04	Setting command data error Error in the setting command data.

If the error code is 0x83, it is displayed together with the vendor special error code.

Error Code	Description
0x01	Function Code Error Unsupported function code or sub function code in use.
0x02	Memory Address Error Memory address you tried to access is not in the memory address range.
0x03	Faulty Quantity The data count in read or write operations is outside the allowed range (1 to the maximum, as defined per model).
0x04	Data Type Error Not supported by the defined mode or data type. Not supported by the protocol ID or device code.
0x81	Protocol ID Setting Error When running a vendor specific command, the protocol ID did not match the I/O.
0x82	Data Length Setting Error When running a vendor specific command, the data length setting for the vendor special area does not match the I/O.
0x83	Vendor Special Area Error When running a vendor specific command, a vendor special error occurred in the vendor special area.

Vendor special error code

Error Code

Description

0x01

Azbil protocol ID setting error

Example:

Error code = 0x83, vendor special error code = 0x81, and Modbus error code = 0x01, it is displayed 83,81,01.

Vendor special error code

Error Code

Description

0x81

MODBUS RTU abnormal response

Received a Modbus error. For more information, check the Modbus error code table.

Modbus error code

Error Code	Description
0x01	Illegal function Unsupported function code in use Connected to unsupported the I/O
0x02	Illegal data address Data address error (area where access is prohibited)
0x03	Illegal data Write out-of-range value Equipment related, write-protected and read prohibited
0x13	Write mode error

If the error code is 0x83, and the vendor special error code is 0x01, it is displayed 83,01.
If the error code is 0x83, and the vendor special error code is 0x81, it is displayed together with the Modbus error.

Error Code	Description
0x01	Function Code Error Unsupported function code or sub function code in use.
0x02	Faulty Register Number Accessing register number that is not registered.
0x03	Faulty Quantity The number of read or write data for reading is not between one and the maximum quantity (as defined per model). In write mode, the number of data in the message is not the specified quantity.
0x04	Data Type Error Not supported by the defined mode or data type.
0x05	Access Limit Error Access to the specified register is not permitted.
0x06	Outside Setting Range Error The write data value is outside the maximum and minimum limit.
0x07	Data Matching Error Tried to access only a portion of memory in the multiple register unit. Tried to access multiple registers that exceed the register group.
0x08	Condition Error Command message content cannot be processed due to the condition defined by the register.
0x09	Process Conflict Error Cannot be processed due to priority issues with other channels.